Wen 2 Speed Single Bevel Miter Saw Review

The vii All-time Miter Saws of 2022 for Perfect Angled Cuts

Brand perfectly beveled cuts with the DEWALT 12-Inch Sliding Compound Miter Saw

By

Updated on 01/25/22

We independently research, test, review, and recommend the best products—learn more about our process. If you lot buy something through our links, we may earn a commission.

If y'all tackle a lot of carpentry or woodworking projects, a miter saw is a worthwhile investment. These power saws provide perfect crosscuts—cutting directly across the wood'due south grain—but where they actually shine is with miter or bevel cuts. Explains Andrew Wilson, abode comeback contractor and founder of  Contractor Adviserly, "Miter saws are perfect for making straight cuts with an angled edge. You can easily shift the saw to the left or correct to reach your desired angle. These saws are also stable enough for easy crosscuts, even through thick woods. They are commonly used by contractors and homeowners akin when doing habitation improvement projects like installing crown molding and door frames."

We evaluated miter saws based on accurateness, reliability, durable construction, versatility, and overall performance. Our top choice is the DEWALT 12-Inch Sliding Chemical compound Miter Saw, which excels in all of those areas.

Here are our favorites miter saws.

What We Like

• Handles larger boards than most

• Bevels to the left and the right

• Very efficient grit collection system

What We Don't Similar

• Expensive

If you demand to cut larger boards, including 4 x 4s or lumber up to 14 inches wide precisely and speedily, yous'll capeesh the size and power of the DEWALT 12-Inch Sliding Compound Miter Saw. This versatile tool has sliding guiderails to permit for larger or longer materials—with a special setup included in the pedagogy transmission, you lot can even crosscut boards up to 16 inches beyond, which is especially handy if y'all are building cabinets, a deck or fence, or preparing lumber for hardwood flooring. Merely information technology'south not just good for working on large boards; you lot can of class likewise use the tool to precisely cut baseboards, moldings, and other trim pieces.

The saw has a fifteen-amp motor with a no-load speed of 3,800 rpm. It adjusts for miter cuts upwards to 60 degrees to the right and 50 degrees to the left, and bevel cuts from 48 degrees to the right or left. Ten positive stops on the stainless steel detent plate make quick work of precisely cutting at common measurements. And yous won't need to worry near excessive sawdust; the highly efficient grit collection system captures over 75 percent of dust, although you still need to vesture protective eyewear every bit with whatever ability saw.

Power Source: Corded | Motor: 15 amps | Blade Size: 12 inch | Type: Dual compound sliding

What Nosotros Like

• Laser guide

• Extension tabular array

• Excellent dust command

What We Don't Like

• Just tilts to the left for bevels

Crosscuts, bevel cuts, miter cuts, working on boards as big every bit 13 inches across, slicing through wood, plastic, and metal: the TACKLIFE 10-Inch Compound Sliding Miter Saw does all of these things and more than.

This feature-packed saw comes with three 10-inch blades—1 with 48 teeth for multipurpose use and two with forty teeth for cutting wood and plastic—a laser guide for the utmost in accuracy, an extendable table for stability when cut longer materials, an iron blade shield for safety, and a chip bag plus grit port to keep sawdust to a minimum.

The saw has a 15-amp motor and two speeds: 4,500 rpm for speed, or three,200 rpm for precision. That's an unusual feature for a miter saw. You tin can adjust the bevel bending from 0 to 45 degrees, and the miter bending from -45 degrees to 45 degrees. This is a great saw if you are cutting wood for crown molding or baseboards, or make piece of furniture with askew or angled trim.

Ability Source: Corded | Motor: xv amps | Blade Size: x inch | Type: Compound sliding

What We Similar

• Reasonable price

• Good for basic DIY projects

What We Don't Like

• Only tilts to the left for bevels

• No extension rails

If yous simply expect to need a miter saw occasionally, or for one large project redoing flooring, making a furniture, or cutting trim, in that location's no need to spend a lot of money on your miter saw. Instead, consider the Metabo HPT—that'south the new name for Hitachi—C10FCGS x-Inch Compound Miter Saw.

While at that place's no sliding rails for cut wider materials—the maximum width is 5-21/32 inches—nor a laser for extra guidance, you do get a saw with a fifteen-amp motor, a no-load pinnacle speed of 5,000 rpm, a bevel range of 0-45 degrees to the left, and a miter range of 0-52 degrees to the left or correct. That's pretty much all you demand to tackle most DIY projects around your home or workshop.

The miter saw includes a grit purse, 10-inch 24-tooth saw blade, and vise assembly.

Power Source: Corded | Motor: 15 amps | Blade Size: ten inch | Type: Single compound

What Nosotros Like

• Adept for very detailed, small projects

What Nosotros Don't Similar

• Can't handle big pieces of molding or other materials

If you build dollhouses, models, film frames, or other crafts that crave detailed work on very pocket-size pieces, you probably don't demand a large, powered miter saw. Instead, you lot'll find a miter box, such as the i from Olson Saw, to be highly constructive for your needs and your budget.

Basically, a miter box is a metallic box—this one is aluminum—with slots for positioning a small hand saw at only the right angle for making accurate miter cuts. The box has three 0.xiv-inch slots: one each for 45, 60, and 90-degree angled cuts. Yous tin cut materials up to 2 inches in width and 7/eight inches in depth.

Y'all'll also get a wooden-handled fine kerf universal saw with a 6-1/2-inch, 42-teeth-per-inch blade. The saw easily cuts through balsa and other soft woods, plastic, copper, and contumely, leaving behind polish edges without any ragged spots requiring further sanding.

The Olson Saw Miter Box is the perfect addition to whatsoever crafter's toolkit, or equally a useful tool if yous desire to cut a few pieces of wood or other materials to use equally trim on furniture or around the house.

Power Source: Manual | Motor: Northward/A | Blade Size: Due north/A | Type: N/A

What We Like

• Bevels to the left and right

• Compact and portable

What We Don't Like

• Few complaints about Ac adapter not working

• Expensive

Most miter saws require a consequent power source to work reliably for long periods of fourth dimension. While this is no problem for garage or backyard projects, it can exist a claiming if you are on a worksite far away from an outlet. That is where a cordless miter saw has the reward. With a large ion-lithium battery, the DEWALT Flexvolt 120-Volt MAX volition work in places average miter saws won't.

The dual compound sliding saw is compact for actress portability. Powered by ii 60-volt battery packs, the 12-inch blade will terminal upward to 289 crosscuts on a single charge. Across the portability, the saw also includes standard miter settings up to 50 degrees to the left and 60 degrees to the correct, and an adjustable back-and-forth slide for wider woods. For longer projects, you lot can also plug the saw into an outlet with the supplied cord.

Ability Source: Cordless | Motor: 60 amp hours | Blade Size: 12 inch | Blazon: Dual compound sliding

What We Like

• One blade handles most materials, including metal

• Laser guide

What We Don't Like

• Simply tilts to the left for bevels

Near miter saws require a alter of blades if you plan on cut materials other than wood. Not and so with the Evolution Ability Tools 10-Inch Multi-Material Sliding Miter Saw, however. Its premium Japanese tungsten-carbide-tipped blade hands handles a wide range of materials, including hardwood, reclaimed woods with nails, balmy steel, rebar, aluminum, copper, electrical conduit, plastic pipes, plexiglass, rubber, and composites.

The saw has a xv-amp motor and no-load superlative speed of 2,500 rpm. Information technology can crosscut wood up to 11.75 inches broad, and cuts bevels upwards to 45 degrees and miter cuts upwards to fifty degrees in either direction. And with the included light amplification by stimulated emission of radiation guide, you'll e'er know that your cuts are precise. The dust bag keeps sawdust under command for a cleaner workshop.

Power Source: Corded | Motor: 15 amps | Blade Size: 10 inch | Type: Chemical compound sliding

What We Similar

• Very precise controls for bevel and miter cuts

• Handles long boards and trim pieces

• Bevels to the left and correct

What We Don't Like

• Very expensive

Cut trim, baseboards, siding, and other panels requires a dual bevel for clean cuts on either cease of the piece. Since baseboards and other trim are typically long pieces of woods, a sliding dual-bevel blade is the all-time choice if yous'll be taking on such a project. The Milwaukee 12-Inch Dual-Bevel Sliding Saw comes with many handy features in addition to the dual-bevel blade to brand cut trim, baseboards, and similar items quick and painless.

The carbide blade is 12 inches in diameter for wider cuts. When even more width is required, the bract moves dorsum-and-forth on the sliding arm. With a dual-bevel cutter capable of upwards to 48-degree angles in either direction, this bract is also a perfect choice for people wanting more desperate bevels in their wood cuts. The 15-amp motor is i of the most powerful drivers on the market, capable of up to iii.3 horsepower to chew through denser materials.

Ability Source: Corded | Motor: fifteen amps | Blade Size: 12 inch | Blazon: Dual chemical compound sliding

Terminal Verdict

The TACKLIFE 10-Inch Sliding Compound Miter Saw (view at Walmart) can handle just most anything you throw at it, including crosscuts, bevels, miters, large boards, woods, plastic, and even metal. That, plus its impeccable performance and many great features win it our tiptop spot. But if yous're just looking for a basic miter saw for occasional use, y'all'll find that the Metabo HPT C10FCGS x-Inch Compound Miter Saw (view at Amazon) is suited to almost DIY projects and is very reasonably priced.

Power Source

When choosing a miter saw, you lot'll have two choices for the power source: batteries or Ac current.

The majority of miter saws are corded power tools that run off your household AC current. The common motor sizes are 10-amp, 12-amp, and 15-amp. But while the lower powers are sufficient for light, occasional use, if you expect to rely on your miter saw for frequent use, cuts through big or thick pieces of wood, or extended cutting sessions, you'll likely be happiest with a fifteen-amp motor.

Cordless miter saws generally run on a twenty-volt battery. The reward of these tools is that you can take them anywhere without needing to worry about an electrical outlet or a string getting in your manner. On the downside, they are non equally powerful as their corded counterparts and you'll demand to keep rail of the bombardment's available life to avert running out of juice midway through a projection.

Whether corded or cordless, most miter saws reach a maximum unloaded speed of somewhere between 2,500 rpm and 5,000 rpm.

What Our Experts Say

"One of the biggest dangers with corded tools is the cord itself. Along with potentially existence a tripping adventure, information technology can also exist an electrical adventure if the cord is damaged in whatsoever way. You want to bank check that at that place are no cracks or fraying in the cord before each use." Andrew Wilson, home comeback
contractor and founder of  Contractor Adviserly.

Type

At that place are several dissimilar types of miter saws, based on the cuts and angles they tin achieve. As the name suggests, all miter saws are capable of a miter cut, which is an angled cutting across the width of the board, and a crosscut, which is a simple cut straight across the board, but some miter saws go beyond that to include bevel cuts, which are angled cuts that create something like an "overhang" at the cutting edge. The five basic types of ability miter saw are:

• Basic: This saw cuts miters and crosscuts, just does not tilt for beveled cuts.
• Unmarried Compound: The simplest compound miter saws cut miters, crosscuts, and tilt to the left for bevel cuts. The one-way tilt means that you'll demand to plow the board over to create a bevel from the other direction.
• Dual Compound: Similar a unmarried compound miter saw, this tool cuts miters, crosscuts, and bevels, but can tilt in both directions, making it a much more convenient pick if y'all cut a lot of bevels.
• Compound Sliding: These unmarried compound miter saws accept extended runway so yous can cut longer boards.
• Dual Chemical compound Sliding: The most versatile pick, these miter saws are capable of crosscuts, miter cuts, bevel cuts from either direction even on longer boards.

Blade Size

The two near common sizes of miter saw blades are 10 inch and 12 inch, although at that place are also saws with 8-inch blades for detailed work.

If you but expect to use your miter saw for cut trim or siding, and don't plan on cutting anything more than an inch thick or 6 inches broad, a x-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better selection.

FAQ

• What is a miter saw used for?

  While miter saws tin can cut directly across a piece of wood, their main employ is in cut wood at various angles, which comes in handy when making furniture or picture frames, cutting various types of trim, constructing cabinets, or trimming flooring.

  There are four basic cuts you tin can make with a miter saw.

  • Crosscuts are the nearly basic type of cut; y'all simply cut straight across the board against the grain of the woods. This cutting can exist made past just almost any blazon of saw.
  • Miter cuts are angled cuts at the cease of a board or slice of trim. Every bit an case, await at the trim around your domicile's front door; the spot where the trim pieces bring together together at the upper two corners of the door are miter cuts.
  • Beveled cuts are an undercut angle cut. One common example in your home is the spot where 2 pieces of baseboard run into at a corner.
  • Compound cuts combine both a bevel and a miter. These cuts are frequently used on crown molding to achieve perfect joinings at corners.
    

• What'due south the difference between a circular saw and a miter saw?

  At first glance, miter saws and circular saws wait rather similar, so it's easy to recollect that they are basically the same tool. But while it's true that both can be used to make crosscuts—a directly cut across the grain of the wood—there are significant differences betwixt these 2 power tools.

  Round saws are very useful for straight cuts both beyond the grain (crosscut) and with the grain (rip cut). They are an fantabulous selection when you demand to cut a big slice of plywood downwards to size, or perform other basic cutting activities. Circular saws are the best choice for framing or other structure projects. With the correct blade, they tin too cutting masonry, concrete, and even metal.

  Miter saws, on the other mitt, are best used for angled cuts, including miters and bevels or a combination of those 2 cuts, although they can also make crosscuts. They aren't so useful for ripcuts, however, nor are they often used to cut metallic or masonry. Miter saws are the all-time choice if yous need to cutting a lot of angles; for example, when cutting baseboards, crown molding, trim for cabinets, or when building piece of furniture.

• How practise you modify the blade on a miter saw?

  If your miter saw blade becomes dull, information technology'south time for a change. The procedure is non hard, and should just take a few minutes. While the specifics tin can vary from brand to brand, the following guidelines are fairly mutual to most miter saws:

  1. Beginning, unplug your miter saw or remove its battery.
  2. Loosen the screw belongings the plastic bract guard in place, and elevator the guard out of the way.
  3. Press the spindle lock to continue the blade from moving while yous work. The spindle lock will be on the saw housing, either at the front end or the back depending on the brand. Depress the spindle lock and so it remains down.
  4. With an Allen wrench, plow the bolt that holds the bract in place in a clockwise direction.
  5. Remove the outer washer and the commodities. If there is an inner washer, leave it in place.
  6. Carefully remove the old bract.
  7. Lubricate the inner and outer washers with a drop of motorcar oil.
  8. Place the new blade into position with the teeth facing down.
  9. Put the outer washer back into identify and tighten with your fingers.
  10. Spiral the bolt back into place with your Allen wrench, turning in a counterclockwise direction until the blade is secure.
  11. Wipe away whatever excess oil from the blade.
  12. Lower the bract guard into place and tighten its screw.
      

This article is edited and updated by Michelle Ullman, the tool good for The Bandbox. She has all-encompassing experience not just in writing almost all things related to the home, but besides in conveying out diverse DIY projects, including landscaping, painting, flooring, wallpapering, article of furniture makeovers, and uncomplicated repairs. For this roundup, she considered dozens of miter saws, evaluating each for bones features, extras, and customer feedback, as well as input from Andrew Wilson, home improvement contractor and founder of  Contractor Adviserly.

ellardthaps1957.blogspot.com

Source: https://www.thespruce.com/best-miter-saws-4155809

Share this post